Mobile Hoist

  Brief Description of Mobile Elevator
Mobile Hoist.
Mobile Hoist loading a Vibro
Sifter in dust free way

Mobile elevator has a base of 900 mm x 650 mm. This base is having mobility with four heavy duty castors of PU wheels with thrust bearings mounted with S.S. 304 side brackets. On this base hydraulic powerpack is mounted along with balance weights. Hydrailic power pack runs with 3 phase, 1 HP AC electrical motor of Bharat Bijlee make. On this frame there are two vertical members of S.S. 304 channels of 1600 mm long (height of these members depends upon your required lift and door height as this movable hoist in it’s lowest position should be able to go through your lowest door height) and inside that assembly there is a movable frame. This movable frame is lifted by the hydraulic cylinder. On the inner side of this movable frame there is a slider assembly which has a bracket to lift the load. This slider assembly of carriage slides on ball bearing inside the movable assembly. This slider assembly gets pulled up by stainless steel wire rope through the hydraulic cylinder. All this vertical member and slider assembly are from S.S. 304 and there is no cladding.
 

Mobile Hoist. Mobile Hoist. Mobile Hoist.
     
Typical Applications
To load RMG (high shear mixer ) using IPC through dust free connection.
To load tablet press through “Y” chute and dust free connections.
To load blister packing machine hopper with tablets.
To load vibro sifter in a dust free way.
   
Battery operated option
Here there are DC batteries on which the mobile hoist operate.
These are rechargeable batteries and so they can be charged as and when required.
Mobile Hoist.
Safety requirements
If the power goes OFF, the hoist remains where it was.
If the hydraulic pipe gets cut even if accidentally, the hoist does not come down immediately.
Limit switches are provided to stop the hydraulic drive when the load reaches desired height.
 
 
Equipments for Dust Free Material Transfer
   Equipments for Solid Dosage     (Production Scale)
Rapid Mixer & Wet Granulator
Fluid Bed Equipments
Fully Automatic Coating Systems
Octagonal Blenders
Container Tumbler
Commuting Mill
Vibro Sifter
Oscillating Granulator
Paste Preparation Kettle
Sifting & Milling Equipment
   Equipments for Solid Dosage     (Laboratory & Pilot Scale)
Laboratory Fluid Bed Dryer/Granulator
Rapid Mixer & Wet Granulator R&D MODEL (3,5 & 10 Lits)
Equipment for Lab & Pilot Scale Operation
   Equipments for Dust Free Material     Transfer
Mobile Hoist
Lifting & Tipping Device
Vacuum Transfer Devices
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
SARAL ENGINEERING COMPANY

Office : A-9, First Floor, Raj Industrial Complex, Military Road, Marol,
Mumbai - 400 059. India.
Tel : +91-22-2920 4962 / 2920 6774, Fax : +91-22-2920 6113.
Factory : Plot no. 114, Bhadakmora, G.I.D.C., Vapi - 396 195,
Gujarat, India.
Tel : +91 - 260 - 2422774, Fax : +91 - 260 - 2400409

E-mail : director.saral@gmail.com, director@saraleng.com
Created and Hosted by : illusion artist